Club Car Governor Adjustment - Devon Golf Club (2024)

Club Car golf carts are a popular choice for golfers and non-golfers alike due to their durability and reliability. However, over time, the governor on a Club Car may need to be adjusted to maintain its optimal performance. The governor is responsible for regulating the speed of the golf cart, so if it is not functioning properly, the cart may run too fast or too slowly.

Adjusting the governor on a Club Car can be a simple process if you know what you are doing. There are several methods including adjusting the governor arm, removing and bypassing the governor, or using the zip tie mod. It is important to note that before making any adjustments, you should consult your Club Car’s owner manual or seek the advice of a professional to ensure that you are making the correct adjustments and not causing any damage to your golf cart.

What is a Club Car Governor?

A Club Car governor is a device that controls the maximum speed of a golf cart. It is a mechanical device that prevents the engine RPMs from increasing beyond the recommended specifications. The governor is a crucial component of a golf cart’s engine system, as it ensures that the engine does not overheat or become damaged due to excessive speed.

A governor is only relevant to a gas golf cart. Electric golf carts don’t have governors fitted to limit their speed.

Club Car governors have three settings that monitor the engine and slow it down as it approaches top speed. These settings are the low, medium, and high speed settings. The low-speed setting is used for driving the golf cart in tight spaces, while the medium and high-speed settings are used for driving the golf cart on the course.

Adjusting the Club Car governor is a common practice among golf cart owners. It allows them to increase or decrease the maximum speed of their golf cart, depending on their needs. However, it is important to note that improper adjustment can be dangerous if done incorrectly. It is recommended that you seek the assistance of a professional mechanic or follow a step-by-step guide to ensure that it is done safely and correctly.

Adjust the governor on a Club Car cart

Why Adjust the Governor?

Club Car golf carts are designed to provide a smooth and comfortable ride on the golf course. However, the governor on these carts can sometimes limit the speed of the engine, which can be frustrating for some golfers. Here are some reasons why you might want to adjust your Club Car:

• You want to make your golf cart go faster: Making an adjustment to the governor on your Club Car can help you increase the speed of your cart, which can be particularly useful if you are in a hurry or want to get to the next hole faster.
• You want to improve the performance of your cart: A poorly adjusted governor can cause your cart to run rough or stall, which can be frustrating and even dangerous. Adjusting it can help improve the performance of your cart and make it run more smoothly.
• You want to customize your cart: Some golfers like to customize their golf carts to their liking. This can help you achieve the desired speed and performance for your cart.

It’s important to note that any adjustments to your cart should be done with caution. If you’re not familiar with the process, it’s best to seek help from a professional who can ensure that it is done correctly and safely.

If you have an EZGo or Yamaha golf cart then it’s likely that you can make the same adjustment to increase the top speed from about 15 mph to 22 mph.

How to Adjust the Governor on a Club Car

Adjusting the governor on your Club Car can help you regulate the speed of your golf cart. Here are some general steps to follow:

1. Locate the governor arm or cable: The governor arm or cable is usually found at the engine and linked to the throttle cable.
2. Remove the cable from the governor arm: To do this, remove a clip or cotter pin and slip the cable off the arm.
3. Perform the adjustment: Use a wrench (or screwdriver depending on the cart model) to turn the governor shaft clockwise to increase speed or counterclockwise to decrease speed.
4. Reattach the cable to the governor arm: Slip the cable back onto the arm and secure it with a clip or cotter pin.
5. Test the golf cart: Take the golf cart for a test drive to ensure that the governor adjustment is correct.

Note that the exact steps may vary depending on the model and year of your Club Car. Always refer to the manufacturer’s instructions or consult a professional if you are unsure.

Additionally, it is important to remember that governor adjustment can affect the safety and performance of your golf cart. Be sure to make adjustments carefully and responsibly.

Where Do I Find The Governor Spring?

The governor spring is usually located next to the governor arm in the engine of the cart. You can use the governor spring to adjust your cart’s top speed.

Club Car Governor Adjustment: Conclusion

Adjusting your golf cart governor is an essential maintenance task that can help keep your engine running smoothly. Whether you’re experiencing engine issues or simply want to improve performance, adjusting the governor can make a significant difference in how your golf cart operates.

Before attempting to adjust the governor, it’s important to do your research and ensure that you have the necessary knowledge and tools to complete the task safely and effectively. While some people may be able to perform this adjustment themselves, it’s always a good idea to seek the help of a professional if you’re unsure.

If you do decide to adjust it on your own, be sure to follow the manufacturer’s instructions carefully and take all necessary safety precautions.

Overall, adjusting the governor on your Club Car golf cart can be a simple and effective way to improve performance and extend the life of your engine. By taking the time to learn about this essential maintenance task and following best practices, you can keep your golf cart running smoothly for years to come.